Way Ne Hardware Supply
Sdn Bhd

No. 243, Jalan Kapar, Batu Belah, 41400 Klang, Selangor Darul Ehsan, Malaysia.

+603-3290 4366

Ms Apple Lim
+6019-2147200

Wayne
+6013-6237200

MULTI VOLT(36V) Cordless Slide Compound Miter Saw C3607DRA

Previous 13 / 22 Next

MULTI VOLT(36V) Cordless Slide Compound Miter Saw C3607DRA Sawing / Planing (Li-ion Cordless Tools) Hikoki Power tools


Smooth Cutting like a Corded Tool

Owing to a highly efficient brushless motor and high power MULTI VOLT battery, this tool provides smooth cutting like a corded tool with fine finish.

  • Runtime per Charge (approx.)*

    With BSL36A18 (2.5Ah)

    Approx. 60cuts
    Cutting 50×300mm Hemlock at 0° Bevel
    Approx. 145cuts
    Cutting 2X10 SPF at 0° Bevel

    With BSL36B18 (4.0Ah)

    Approx. 100cuts
    Cutting 50×300mm Hemlock at 0° Bevel
    Approx. 230cuts
    Cutting 2X10 SPF at 0° Bevel

    Cutting Performance (approx.)

    Stable cutting speed like a corded tool with fine finish
  • The values are for reference purposes and may vary according to the materials and working conditions.

Lowest Noise in its Class*1

  • The industry's first*2 twin-belt drive system that offers low noise and comfortable cutting without any impact or vibration caused by gear abutment.

    Noise Level (While cutting in 2X10 SPF.)

    No Load : 79dB
    Load : 80dB

    Twin-belt drive system: smooth transmission through the twin-belt
  1. As of December 2018. Among 185mm cordless slide compound miter saws made by leading power tool manufacturers while cutting in 2X10 SPF at bevel angle of 0°. (Survey by Koki Holdings) The value may vary according to the working conditions.
  2. As of December 2018. Among cordless slide compound miter saws made by leading power tool manufacturers. (Survey by Koki Holdings)

Tool-on Twin LED Lights

  • Prevent users from being inconvenienced by lights during operation or while carrying the tool. The lighting mode can be changed for different applications.

    Twin LED Lights

Dual Bevel CuttingCutting Capacity at 0° (HxW): 58 x 310mm

  • Enables rapid cutting various materials including floor board without the need of rotating the workpiece.

    Cutting Capacity:58 x 310mm / Dual Bevel Cutting

Compact Slide Systemallows for efficient cutting in tight spaces

  • With a motor head that slides along the fixed rails with zero rear clearance, this system provides large cutting capacity in tight spaces or when the tool is placed against a wall.

    780mm in depth

Laser Marker: Guide System on cut line

  • Auto Switch off Function

Bevel Angle Fine Adjustment System

  • Accurately sets the bevel angles by turning the knob while holding the motor head which is half-locked at the desired angle.

    Knob

Burr Reduction System

  • A spacer enables shallow groove cuts to minimize burrs on the materials when making slide cuts.

    Spacer

Specifications

Max Cutting Capacity (H x W)

  Bevel
Left 45° Right 45°
Miter
39 x 310mm
45 x 263mm
(25mm thick aux. board)*

58 x 310mm
67 x 263mm
(25mm thick aux. board)*

16 x 310mm
22 x 263mm
(25mm thick aux. board)*
Left/Right 45°
39 x 218mm
45 x 183mm
(20mm thick aux. board)*

58 x 218mm
67 x 183mm
(20mm thick aux. board)*
Right 45°
16 x 218mm
22 x 183mm
(20mm thick aux. board)*
Right 57° -
58 x 168mm
67 x 138mm
(15mm thick aux. board)*
Left 31°
16 x 258mm
22 x 223mm
(20mm thick aux. board)*
  •  Max cutting capacity when an auxiliary board is mounted on the fence. When cutting a workpiece that exceeds the max height above, adjust the lower limit position so that the base of the motor head will not come in contact with it.
Blade Dia. 185mm
Miter Cutting Angle Right 0° – 57°, Left 0° – 45°
Bevel Cutting Angle Right 0° – 45°, Left 0° – 45°
Compound Cutting Angle Bevel Left 0° – 45° Miter Left 0° – 45°, Right 0° – 45°
Bevel Right 0° – 45° Miter Right 0° – 45°, Left 0° – 31°
Voltage 36V
No Load Speed 4,000/min
Dimensions 830 x 780 x 484mm
Weight*1 15.1kg with BSL36A18
15.4kg with BSL36B18*2
Standard Accessories*3 2 Batteries (BSL36A18), Charger (UC18YSL3), Blade, Dust Bag, Side Handle, Sub Table Ass'y, Holders, Hex. Bar Wrench, Battery Covers
  1. Weight according to EPTA-Procedure 01/2014.
  2. Sold separately.
  3. Standard accessories vary by country or area.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start