Way Ne Hardware Supply
Sdn Bhd
No. 243, Jalan Kapar, Batu Belah, 41400 Klang, Selangor Darul Ehsan, Malaysia.
Ms Apple Lim
+6019-2147200
Wayne
+6013-6237200
MULTI VOLT(36V) Cordless Rotary Hammer with Quick-release Tool Retainer DH36DPC
| Previous | 51 / 89 | Next |
Fast Drilling Speed Equivalent to an Electric (AC) Model *1
Drills fast like an AC rotary hammer with a combination of the highly efficient brushless motor and high power output MULTI VOLT battery.
-
Runtime per Charge
Approx. 120 holes *2
With the BSL36A18 battery. When drilling into concrete with a ø8.5mm x 40mm drill bit.
- When fully charged with the dust extractor system detached. In comparison with the DH28PCY rotary hammer. The performance depends on the workpiece material and operating conditions.
- The value is for reference purposes, and depends on the workpiece material and operating conditions.
More Lightweight and More Compact *1Same Power. Less Size.
-
The compact and lightweight MULTI VOLT battery enables a significant reduction in the overall size of the tools.
*Compared to the DH36DBL cordless rotary hammer.
- Compared to the DH36DBL cordless rotary hammer.
- Without the dust extractor system, the DH36DPB has the same weight and size as the DH36DPA.
Ergonomic Design
-
Pic.1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to drill easier.
Pic.2: The grip of the handle is close to the center of gravity for easier handling.
Reactive Force Control(RFC)
When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool's built-in controller stops the motor's output before the entire tool jerks.
CautionFast Drilling Speed Equivalent to an Electric (AC) Model *1
-
allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DPC).
Note : Turn the change lever to ''Hammering only'' mode when replacing a tool retainer with another. Use the machine only in ''Rotation only'' mode when the drill chuck holder installed.
Specifications
| Model | DH36DPA | DH36DPC | |
|---|---|---|---|
| Capacity | Concrete | 28mm (1-1/8'') | |
| Steel | 13mm (1/2'') | ||
| Wood | 32mm (1-1/4'') | ||
| Bit Shank | SDS-plus | ||
| Battery Voltage | 36V | ||
| No Load Speed | 0 - 1,100/min | ||
| Full Load Impact Rate | 0 - 4,300/min | ||
| Overall Length | 351mm (13-13/16'') | 383mm (15-3/32'') | |
| Weight*1 | 3.9kg (8.6lbs.) | 4.2kg (9.3lbs.) | |
|
Vibration Total Values (triax vector sum)*2 |
Hammer Drilling into Concrete | Vibration emission value ah, HD = 17.5 m/s2 | Vibration emission value ah, HD = 18.3 m/s2 |
| Uncertainty K = 1.5 m/s2 | |||
| Equivalent Chiseling Value | Vibration emission value ah, CHeq = 15.2 m/s2 | Vibration emission value ah, CHeq = 12.2 m/s2 | |
| Uncertainty K = 1.5 m/s2 | |||
| Standard Accessories*3 | 2 Batteries (BSL36A18), Battery Cover, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case | 2 Batteries (BSL36A18), Battery Cover, Drill Chuck Holder, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case | |
- Weight according to EPTA-Procedure 01/2003.
- The vibration total values were determined according to EN60745.
- Supplied accessories vary by country or area.