Way Ne Hardware Supply
Sdn Bhd
No. 243, Jalan Kapar, Batu Belah, 41400 Klang, Selangor Darul Ehsan, Malaysia.
Ms Apple Lim
+6019-2147200
Wayne
+6013-6237200
18V Cordless Impact Driver Drills with Brushless Motor DV18DBSL
| Previous | 63 / 89 | Next |
The Large Dia. Brushless Motor and Optimized Gear Ratio Offers...
Most Powerful *1 Torque in its class & Significantly Increased Application Speeds
- Except for the Max Torque Hard of the DV18DBSL. As of September 2016. Among 18V cordless impact driver drills made by leading power tool manufacturers (surveyed by Koki Holdings.)
- Compared to the previous models DV18DBEL
- When drilling (in High Mode + Drill Mode) into SPF 76mm in thickness with a ø24mm auger bit.
| Application (Drilling) | Wood | Brick | Steel |
|---|---|---|---|
 |
 |
 |
|
| DV18DBSL | 50mm | 13mm | 13mm |
Runtime per Charge (approx.) *1
Number of screws driven in wood (Low Mode + Drill Mode)
Number of holes drilled in brick (High Mode + Impact Mode)
- The values are for reference purposes. They vary according to the work material and conditions.
- ø8 x 100mm wood screws into American pine (with 6.5mm pilot holes)
- Mortar 30mm in thickness, with a ø10 masonry drill bit
Compact Design with a Shorter Overall Length
-
DV18DBSL: 184mm *
DV18DBEL: 202mm- The overall length varies by region.
Double-Molded, Large Clutch Dial
-
is clearly readable even when it's worn out.
It's also easy to grip for better handling.
Feedback Speed Control
reduces torque (rpm) fluctuation in a low speed range and ensures stable operation.
This makes follow-up tightening and drill positioning easier.
(Continuous work within a low speed range may cause the temperature of the unit to rise, activating a temperature protection circuit and automatically stopping operation.)
-
Our Original Brushless Motor Technology
► No wearing parts (carbon brushes, commutator, field coil)
► Our original compact controllerLong Lifetime, Maintenance-Free
The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.
Specifications
| Drill Chuck | 1.5 - 13mm (1/16 - 1/2'') Keyless | |
|---|---|---|
| Capacity | Brick | 13mm (1/2'') |
| Mild Steel | 13mm (1/2'') | |
| Soft Wood | 50mm (2'') | |
| Wood Screw | 8 x 100mm (#20 x 4'') | |
| Machine Screw | 6mm (1/4'') | |
| Battery | Voltage | 18V |
| No Load Speed | High | 0 - 1,800/min. |
| Low | 0 - 400/min. | |
| Impact Rate | High | 0 - 27,000/min. |
| Low | 0 - 6,000/min. | |
| Max Torque | Hard | 70Nm (620in-lbs.) |
| Soft | 40Nm (354in-lbs.) | |
| Torque Setting | 1.0 - 4.5Nm (9 - 40in-lbs.) | |
| Overall Length *1 | 184mm (7-1/4'') | |
| Weight *2 | 1.7kg (3.7lbs.) (with BSL1830C) | |
|
Vibration Total Values (triax vector sum) *3 |
Impact Drilling into Concrete |
Vibration Emission Value ah, ID = 7.5m/s2 Uncertainty K = 1.5m/s2 |
| Standard Accessories *4 |
2 Batteries (BSL1850, BSL1830C or BSL1830), Charger (UC18YFSL, UC18YSL3 or UC18YKSL) |
|
| Driver Bit, Battery Cover, Carrying Case | ||
- The overall length varies by region.
- According to EPTA-Procedure 01/2003.
- Vibration total values (triax vector sum) were measured according to EN60745-2-1.
- The included batteries and charger vary by country or area.