Way Ne Hardware Supply
Sdn Bhd
No. 243, Jalan Kapar, Batu Belah, 41400 Klang, Selangor Darul Ehsan, Malaysia.
Ms Apple Lim
+6019-2147200
Wayne
+6013-6237200
14.4V Cordless Driver Drills with Brushless Motor DS14DBSL
Previous | 87 / 89 | Next |
The Large Dia. Brushless Motor and Optimized Gear Ratio Offers...
Most Powerful *1 Torque in its class & Significantly Increased Application Speeds
- Except for the Max Torque Hard of the DS18DBSL. As of September 2016. Among 14.4V/18V cordless driver drills made by leading power tool manufacturers (surveyed by Koki Holdings.)
- Compared to the previous models DS18DBEL
- Compared to the previous models DS14DBEL
- When drilling (in High Mode + Drill Mode) into SPF 76mm in thickness with a ø24mm (DS18DBSL) / ø20mm (DS14DBSL) auger bit.
Application (Drilling) | Wood | Steel |
---|---|---|
DS18DBSL | 50mm | 13mm |
DS14DBSL | 45mm | 13mm |
Runtime per Charge (approx.) *1
Number of screws driven in wood (Low Mode + Drill Mode)
- The values are for reference purposes. They vary according to the work material and conditions.
- ø8 x 75mm wood screws into American pine (with 6.5mm pilot holes)
- ø8 x 100mm wood screws into American pine (with 6.5mm pilot holes)
Compact Design with a Shorter Overall Length
-
DS18DBSL / DS14DBSL: 175mm *
DS18DBEL / DS14DBEL: 202mmm- The overall length varies by region.
Double-Molded, Large Clutch Dial
-
is clearly readable even when it's worn out.
It's also easy to grip for better handling.
Feedback Speed Control
reduces torque (rpm) fluctuation in a low speed range and ensures stable operation.
This makes follow-up tightening and drill positioning easier.
(Continuous work within a low speed range may cause the temperature of the unit to rise, activating a temperature protection circuit and automatically stopping operation.)
-
Our Original Brushless Motor Technology
► No wearing parts (carbon brushes, commutator, field coil)
► Our original compact controllerLong Lifetime, Maintenance-Free
The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.
Specifications
Model | DS14DBSL | |
---|---|---|
Drill Chuck | 1.5 - 13mm (1/16 - 1/2'') Keyless | |
Capacity | Mild Steel | 13mm (1/2'') |
Soft Wood | 45mm (1-3/4'') | |
Wood Screw | 8 x 75mm (#20 x 3'') | |
Machine Screw | 6mm (1/4'') | |
Battery | Voltage | 14.4V |
No Load Speed | High | 0 - 1,500/min. |
Low | 0 - 350/min. | |
Max Torque | Hard | 60Nm (530in-lbs.) |
Soft | 35Nm (310in-lbs.) | |
Torque Setting | 1.0 - 4.5Nm (9 - 40in-lbs.) | |
Overall Length *1 | 175mm (6-7/8'') | |
Weight *2 |
1.6kg (3.5lbs.) (with BSL1430C) |
|
Vibration Total Values (triax vector sum) *3 |
Drilling into Metal |
Vibration Emission Value ah, ID < 2.5m/s2 Uncertainty K = 1.5m/s2 |
Standard Accessories *4 |
2 Batteries (BSL1450, BSL1430C or BSL1430), Charger (UC18YFSL or UC18YKSL) |
|
Driver Bit, Battery Cover, Carrying Case |
- The overall length varies by region.
- According to EPTA-Procedure 01/2003.
- Vibration total values (triax vector sum) were measured according to EN60745-2-1.
- The included batteries and charger vary by country or area.